Products

MDB (Main Distribution Board)

  • Up to 6700 Amps.
  • Rated short time withstand current upto Icw : 100kA for 1 Sec. @ 50*C
  • Form of Construction Form-2a,2b, Form-3a,3b & Form-4 / type-2,6 & 7 in Fixed & Withdrawable type.
  • Ingress Protection of the enclosures are IP54 as per IEC 60529.
  • Mechanical Impact IK10.
  • With Multiple Incomers & Bus-Couplers as per project and consumer requirement.
  • Fully Type Tested Assembly as per IEC 61439-1 & 2.
  • With provision to interface with external System i.e. SCADA, PLC, BMS, etc…
  • Bottom or Top cable entry & exit as per project & consumer requirement.

SMDB (Sub Main Distribution Board)

  • Up to 3200 Amps.
  • Form of Construction Form-2a,2b, Form-3a,3b & Form-4 / type-2,6 & 7 in Fixed & Withdrawal type.
  • Rated short time withstand current upto Icw : 65kA for 1 Sec. @ 50*C
  • Ingress Protection of the enclosures are IP54 as per IEC 60529.
  • Mechanical Impact IK10.
  • Fully Type Tested Assembly as per IEC 61439-1 & 2.
  • Wall mounting or floor standing, Bottom or Top cable entry & exit as per project & consumer requirement.

DB (Distribution Board)

  • Flush and Surface mounting type.
  • Ingress Protection of the enclosures are IP41 & IP65 as per IEC 60529.
  • Row type distribution, pan assembly (single or multi split arrangement)
  • Type tested and UL certified row type distribution board

Capacitor Banks (Power Factor Correction)

  • Rated upto 1000 KVAR.
    With automatic PF regulator with step ON indicators. With or without detuned line reactors (7%, 14% & 5.67% and as per local authority standard & as per project requirements)
  • Ingress Protection of the enclosures are IP54 as per IEC 60529.
  • With forced ventilation / cooling fans as per the heat dissipation calculations.
  • Stand-alone panels in Form-II construction.
  • Easy installation & maintenance.
  • DEKRA Certified Type Tested capacitors as per IEC 60831-1 & 2 ed.3

ATS (Auto Transfer Switch) Panels

ATS system can be provided for the MDB Transformer Incomer & Standby Generator Incomer or with both Transformer Incomers and with or without bus-coupler

  • Hardwired Relay based.
  • Microprocessor Controller based.
  • Electrical & Mechanical interlock (Cable or key)
  • Compact design as per the project requirement.
  • With or without bypass solutions as per the project requirement.
  • Connection ready for external logic control.

Generator Synchronizing
/ Totalising Panels:

Generator Synchronising / Totalising Panels we can
customize as per the project requirement as follow:

  • Relay/ PLC based/ Microprocessor Controller.
  • Load Management System. i.e load shutting as per the genset capacity and as per the consumer requirement.
  • Generator Protection Relays.

MCC (Motor Control Center)

  • Form of Construction Form-2a,2b, Form-3a,3b & Form-4 / type-2,6 & 7 in Fixed & Withdrawable type.
  • Type-1&2 co-ordination for starters according to IEC standards.
  • Provisions for SCADA, PLC, ECS, BMS control with serial communication options.
  • Motor Management Systems / Intelligent Motor Protection Relays.
  • Manual and Auto operations with relay based or PLC based or SCADA based control with VFDs / Soft starters.

Energy Management Solutions

We provide custom energy management solutions on our manufactured panels and retrofit solutions. Our Energy management solutions may be adopted to aligned with ISO 50001, LEED BD+C, LEED EBOM or other Local and international regulations. Solutions are provided for Energy monitoring of individual equipment/feeder energy consumption with minimum disruption to existing installations. Energy management solutions include amongst others load shedding of non-critical loads, custom control of HVAC equipment and demand side management.

Our provides energy assessment services to monitor temporary Energy consumption of individual equipment without disruptions to existing operations. Our advanced energy monitoring meters include Wifi enabled IP communication protocol thereby limiting the need for wiring.

Our Energy management solutions achieve the below.

  • Reduction in Utility costs
  • Comply with Legal authorities/Certification bodies.
  • Transparency of energy consumption of final loads/- feeders.
  • Reduced Carbon emissions
  • Identify energy wastage
  • Custom set limits for each load/feeder
  • Facility Management teams use continuous monitoring of equipment identifies problems early and help to
    move to a predictive maintenance model.

Safety Transformers

  • Portable safety transformer for power tools
  • Lighting & machinery application on construction sites
  • Transformer & enclosure shall conform to safety standards
  • Number of sockets, its current rating, ELCB/MCB rating
  • Metal enclosure red & yellow, RAL 7032 protection IP-55…etc.
  • Temperature insulating class F
  • Dry type, Vacuum impregnation
  • Terminals: Terminal block at input & Industrial socket at output
  • CEE panel mounted receptacles, DIN VDE 0623, EN 60309-2
  • Housed in reinforced fiber glass enclosure providing safety and durability
  • Sealed type and easy to handle, cable gland is provided for incoming cable access
  • Fiber encapsulated enclosure, protection index IP-55
  • Cast resin encapsulation, protection from fire hazard, air and water.

Renewable Energy Technology

We take pride in supporting Dubai and the UAE in its aspirations to be the leader in Renewable Energy technologies

PV Combiners

Photovoltaic Combiner boxes bring the output of several Solar PV strings together. Our Combiner boxes are designed to safely operate in the harshest environmental conditions with Ingress protection of up to IP54. We offer both floor mounted and wall mounted panels to suit the installation conditions.

Distribution Boards for EV Chargers

  • Our panels are standardizing outdoor distribution boards that fulfills the power and protection needs of multiple Charger Manufacturers.
  • Our distribution board are delivered with main switch fuse, transformer kit for CTs and mounting plate for billing meter installed from factory. Metering and CTs can  be custom build to suit the number of Chargers to be installed.
  • The Distribution boards can be powder coated to the color of choice to suit the customer needs.

QUALITY POLICY

We are committed to design and supply quality products, full filling customer needs and applicable statutory and regulatory requirement with international and local standards, enhancing our customer satisfaction with continual improvement through effective implementation of quality management system as per the ISO 9001-2015.